Roofing Calculator
Roof area from the building's footprint and roof pitch, plus how many roof tiles, shingle bundles or square metres of sheeting you need, ridge and edge lengths, and cost
Outside wall to outside wall
The side the roof slopes across
How far the roof sticks out past each wall; 0 if none
Check the tile maker's figure; concrete tiles are often about 10 per m² (0.93 per ft²)
Extra for cuts and overlaps: about 10% for gable, 15% for hip roofs
Roof area
Material to buy (incl. waste)
Material cost
How roof area is calculated
A sloped roof is larger than the floor it covers. Multiply the footprint (including the overhang) by the slope factor, 1 ÷ cos(pitch): at 35° every square metre of footprint needs 1.22 m² of roof. For a gable, hip or shed roof with the same pitch on every slope this gives the whole roof area; dormers, valleys and different pitches need to be measured separately.
Pitch is given as an angle in degrees (common in Europe), as rise per 12 units of run (US: a 6/12 roof rises 6 inches per foot, ≈ 26.6°), or as a percentage. In the US roofing is sold by the square, 100 ft² of roof, and asphalt shingles usually come 3 bundles per square.
Add waste for cuts, overlaps and starter rows, and always check the manufacturer's coverage and minimum pitch. Underlayment, battens, ridge caps and flashing are extra.